Walid Hegazy

How To Do :) IT


Leave a comment

DPM Is Not Writing On Tape !!!

Hi … today we are going to discuss some of the problems you might face while tacking backup using DPM 2012 on tape library..

image

First error I faced not too long ago is access denied error

Error: The operation failed because of a protection agent failure. ID 998 Details: Access is denied (0x80070005)

image

Continue reading

Advertisements


Leave a comment

DPM 2012 Tape Erase is taking TOO LONG !!!

last week I faced this issue while I was erasing tape on IBM Tape library from DPM Console so it moved to the Drive and 

 

 Erasing …. Erasing……Erasing …. Erasing   for more than 2 hours

image 

 

after some research I found out that there are two types of erase ,long and short Smile

 

Though short erase is much faster than long erase, it does not completely erase the data from the tape “Only mark it as free”. If you have a policy that all data from the tape must be erased and unrecoverable, do not enable short erase.By default, when you erase a tape by using System Center Data Protection Manager (DPM) , DPM performs a long erase.

 

Enabling Short Erase

First make sure that your tape drive supports short erase, then you can enable it on the DPM server by creating the DWORD UseShortErase under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Agent.

 

image

Set the value of the DWORD to 00000000.

After this value is set, all erase operations on the DPM server will be short erases.

 

To revert to long erases, remove this registry key.

 

 

Hope this was helpful ….Thanks for reading