Walid Hegazy

How To Do :) IT

Leave a comment

System center configuration manager 2012 R2 (Part 12) Operating System Deployment 2/2

During the last part we have seen how to prepare our environment for OS deployment and how to capture OS we are using as reference image for the deployment .



Configuration we did during the last part of our series is only the SCCM related configuration

there is others related to DHCP and Network


Options 66 and 67 must be configured so that a PXE client can locate the PXE point and boot into Windows PE using our boot images

Option 66 is the PXE server name or IP

Option 67 is the file name “SMSBoot\x64\wdsnbp.com”


If your PXE Client “booting computer” and the PXE enabled DP are not in the same subnet , you have to configure IP Helper on your switch


Will continue by creating a new device collection for which the operating system is going to be deployed., Right click on Device Collections, click Create Device Collection.


Continue reading


Leave a comment

System center configuration manager 2012 R2 (Part 11) Operating System Deployment 1/2

During this first part of SCCM2012 R2 OSD we will see how to prepare our SCCM for OSD an how to capture our customized OS to use it in the next post as a reference image.

https://i1.wp.com/www.3support.com/wp-content/uploads/2012/01/Windows-XP.png Continue reading

1 Comment

SCCM 2012 R2 – OSD Task Sequence Error Code 0x80091007

I had this error while trying OS deployment at one of the branch sites last week, I didn’t have any one to get the logs from there “will do future post for that” so I started searching for that Error code it means issue with the hash value .


here is a check list followed in tis order:

1)  remove and re-distribute the content, or create the packages again.

2)Make sure there is no hidden file within any of the package source folders.

3)Make sure enable binary differential compression is enabled


4)last but not least , Changing the memory on the computer fixed the issue (it can be caused if there is RAM Fault ) if you have this issue with few number of machines try this firrst.